#        routerboard: yes
#              model: CRS326-24G-2S+
#      serial-number: 94550A408AD7
#      firmware-type: dx3230L
#   factory-firmware: 6.42.11
#   current-firmware: 6.44.6
#   upgrade-firmware: 6.48.3
# 
#             channel: stable
#   installed-version: 6.48.3
# 
# Flags: U - undoable, R - redoable, F - floating-undo 
#   ACTION                                   BY               POLICY             
# 
# software id = PNDP-B02W
#
# model = CRS326-24G-2S+
# serial number = 94550A408AD7
/interface ethernet
set [ find default-name=ether24 ] comment="UPLINK - Wire System"
set [ find default-name=sfp-sfpplus1 ] comment="UPLINK - PR-PGO-BARRACAO"
set [ find default-name=sfp-sfpplus2 ] comment="UPLINK - PR-PGO-BOCAINA"
/interface bridge
add name=bridge1
/interface list
add name=HUAWEI
/snmp community
set [ find default=yes ] addresses=45.225.65.10/32 name=onnet@2017
/user group
set full policy="local,telnet,ssh,ftp,reboot,read,write,policy,test,winbox,password,web,sniff,sensitive,api,romon,dude,tikapp"
/interface bridge port
add bridge=bridge1 interface=HUAWEI multicast-router=disabled
/ip neighbor discovery-settings
set discover-interface-list=!dynamic
/interface bridge vlan
add bridge=bridge1 comment="Wire System" tagged=ether24,sfp-sfpplus1,sfp-sfpplus2 vlan-ids=953
add bridge=bridge1 comment="Wire System" tagged=ether24,sfp-sfpplus1 vlan-ids=1010
/interface list member
add interface=sfp-sfpplus1 list=HUAWEI
add interface=ether24 list=HUAWEI
add interface=ether23 list=HUAWEI
add interface=sfp-sfpplus2 list=HUAWEI
/ip address
add address=192.168.6.2/24 interface=bridge1 network=192.168.6.0
add address=10.10.99.66/24 network=10.10.99.0
/ip route
add distance=1 gateway=192.168.6.1
/ip service
set telnet disabled=yes
set ftp disabled=yes
set www disabled=yes
set ssh address=45.225.65.10/32 port=2222
set api disabled=yes
set winbox port=25000
set api-ssl disabled=yes
/snmp
set contact=OnNet enabled=yes location=WireSystem
/system clock
set time-zone-autodetect=no time-zone-name=America/Sao_Paulo
/system identity
set name="Switch Wire Sistem_Portal do Norte"
/system routerboard settings
set boot-os=router-os
/tool romon
set enabled=yes