#        routerboard: yes
#              model: CRS112-8G-4S
#           revision: r2
#      serial-number: 94D90816441E
#      firmware-type: qca8513L
#   factory-firmware: 6.42.7
#   current-firmware: 6.42.7
#   upgrade-firmware: 6.42.7
# 
#             channel: current
#   installed-version: 6.42.7
# 
# Flags: U - undoable, R - redoable, F - floating-undo 
#   ACTION                                   BY               POLICY             
# 
# software id = KJ3C-ZLSL
#
# model = CRS112-8G-4S
# serial number = 94D90816441E
/interface bridge
add admin-mac=CC:2D:E0:8F:7C:A4 auto-mac=no comment=defconf name=bridge
add name=lan
/interface vlan
add interface=sfp10 name=vlan1 vlan-id=11
add interface=sfp9 name=vlan127-gerencia vlan-id=127
/interface wireless security-profiles
set [ find default=yes ] supplicant-identity=MikroTik
/ip hotspot profile
set [ find default=yes ] html-directory=flash/hotspot
/snmp community
set [ find default=yes ] addresses=45.225.65.10/32 name=onnet@2017
/interface bridge port
add bridge=bridge comment=defconf interface=ether2
add bridge=bridge comment=defconf interface=ether3
add bridge=bridge comment=defconf interface=ether4
add bridge=bridge comment=defconf interface=ether5
add bridge=bridge comment=defconf interface=ether6
add bridge=bridge comment=defconf interface=ether7
add bridge=bridge comment=defconf interface=ether8
add bridge=bridge comment=defconf interface=sfp9
add bridge=bridge comment=defconf interface=sfp10
add bridge=bridge comment=defconf interface=sfp11
add bridge=bridge comment=defconf interface=sfp12
add bridge=lan interface=ether1
add bridge=lan interface=vlan1
/ip address
add address=192.168.5.3/24 interface=vlan127-gerencia network=192.168.5.0
/ip route
add distance=1 gateway=192.168.5.1
/ip service
set telnet disabled=yes
set ftp disabled=yes
set www disabled=yes
set ssh address=45.225.65.10/32 port=2222
set api disabled=yes
set winbox port=25000
set api-ssl disabled=yes
/snmp
set contact=OnNet enabled=yes location="Ipirang\E3o - Pirai do Sul"
/system identity
set name=CRS-SegundoPonto-Ambiental
/system routerboard settings
set silent-boot=no
/tool romon
set enabled=yes