#        routerboard: yes
#              model: CRS317-1G-16S+
#      serial-number: 846C099E905A
#      firmware-type: dx3230L
#   factory-firmware: 6.41
#   current-firmware: 6.43.16
#   upgrade-firmware: 6.43.16
# 
#             channel: stable
#   installed-version: 6.43.16
# 
# Flags: U - undoable, R - redoable, F - floating-undo 
#   ACTION                                   BY               POLICY             
# 
# software id = RX3S-AFV9
#
# model = CRS317-1G-16S+
# serial number = 846C099E905A
/interface ethernet
set [ find default-name=ether1 ] l2mtu=9200 mtu=9200
set [ find default-name=sfp-sfpplus1 ] comment="BKB PIRAI" l2mtu=9200 mtu=9200
set [ find default-name=sfp-sfpplus2 ] comment="BKB CASTRO" l2mtu=9200 mtu=9200
set [ find default-name=sfp-sfpplus3 ] comment="Segundo Ponto Ambiental" l2mtu=9200 mtu=9200
set [ find default-name=sfp-sfpplus4 ] l2mtu=9200 mtu=9200
set [ find default-name=sfp-sfpplus5 ] comment="Cliente(serp@luiz)" l2mtu=9200 mtu=9200
set [ find default-name=sfp-sfpplus6 ] l2mtu=9200 mtu=9200
set [ find default-name=sfp-sfpplus7 ] l2mtu=9200 mtu=9200
set [ find default-name=sfp-sfpplus8 ] l2mtu=9200 mtu=9200
set [ find default-name=sfp-sfpplus9 ] l2mtu=9200 mtu=9200
set [ find default-name=sfp-sfpplus10 ] l2mtu=9200 mtu=9200
set [ find default-name=sfp-sfpplus11 ] l2mtu=9200 mtu=9200
set [ find default-name=sfp-sfpplus12 ] l2mtu=9200 mtu=9200
set [ find default-name=sfp-sfpplus13 ] l2mtu=9200 mtu=9200
set [ find default-name=sfp-sfpplus14 ] l2mtu=9200 mtu=9200
set [ find default-name=sfp-sfpplus15 ] l2mtu=9200 mtu=9200
set [ find default-name=sfp-sfpplus16 ] l2mtu=9200 mtu=9200
/interface bridge
add name=Loopbridge0
add admin-mac=B8:69:F4:00:7D:20 auto-mac=no comment=defconf name=bridge
/interface vlan
add interface=ether1 name="vlan127- monitoramento" vlan-id=127
/snmp community
set [ find default=yes ] addresses=45.225.64.0/22,172.16.20.0/24,10.0.0.0/8,35.237.63.30/32,172.16.21.50/32 name=onnet@2017
/interface bridge port
add bridge=bridge comment=defconf interface=ether1
add bridge=bridge comment=defconf interface=sfp-sfpplus1
add bridge=bridge comment=defconf interface=sfp-sfpplus2
add bridge=bridge comment=defconf interface=sfp-sfpplus3
add bridge=bridge comment=defconf interface=sfp-sfpplus4
add bridge=bridge comment=defconf interface=sfp-sfpplus5
add bridge=bridge comment=defconf interface=sfp-sfpplus6
add bridge=bridge comment=defconf interface=sfp-sfpplus7
add bridge=bridge comment=defconf interface=sfp-sfpplus8
add bridge=bridge comment=defconf interface=sfp-sfpplus9
add bridge=bridge comment=defconf interface=sfp-sfpplus10
add bridge=bridge comment=defconf interface=sfp-sfpplus11
add bridge=bridge comment=defconf interface=sfp-sfpplus12
add bridge=bridge comment=defconf interface=sfp-sfpplus13
add bridge=bridge comment=defconf interface=sfp-sfpplus14
add bridge=bridge comment=defconf interface=sfp-sfpplus15
add bridge=bridge comment=defconf interface=sfp-sfpplus16
/ip address
add address=192.168.88.1/24 comment=defconf interface=bridge network=192.168.88.0
add address=192.168.5.2/24 interface="vlan127- monitoramento" network=192.168.5.0
/ip route
add distance=1 gateway=192.168.5.1 pref-src=192.168.5.2
/ip service
set ssh address=45.225.65.10/32 port=2222
set winbox port=25000
/snmp
set contact="Rodrigo <rodrigo@onnetdigital.com.br>" enabled=yes location=Ipirangao src-address=192.168.5.2 trap-version=2
/system clock
set time-zone-name=America/Sao_Paulo
/system identity
set name=CRS-Ipirangao
/system ntp client
set primary-ntp=200.160.7.186
/system routerboard settings
set boot-os=router-os
/tool romon
set enabled=yes