# routerboard: yes # board-name: hEX # model: RouterBOARD 750G r3 # revision: r3 # serial-number: 8AFF087A58AC # firmware-type: mt7621L # factory-firmware: 3.41 # current-firmware: 6.48.6 # upgrade-firmware: 6.48.6 # # channel: long-term # installed-version: 6.48.6 # latest-version: 6.48.6 # status: System is already up to date # # Flags: U - undoable, R - redoable, F - floating-undo # ACTION BY POLICY # U address added admin write # U device added admin write # U config changed admin write # U config changed admin write # U OSPFv2 interface changed admin write # U OSPFv2 network added admin write # U OSPFv2 interface added admin write # U address added admin write # U ip service changed nzm write # U device added nzm write # U simple queue changed nzm write # U simple queue added nzm write # U device changed nzm write # U device changed nzm write # U interface list member added nzm write # U address added nzm write # # software id = IWXW-UCB9 # # model = RouterBOARD 750G r3 # serial number = 8AFF087A58AC /interface bridge add comment=DownLink name=bridge-lan add name=loopback /interface ethernet set [ find default-name=ether2 ] comment=UpLink /interface vlan add interface=ether2 name=Vlan-883-UpLink-viaMoradas vlan-id=883 add interface=ether2 name=Vlan-884-UpLink-viaRadioSantana vlan-id=884 add interface=ether2 name=vlan1 vlan-id=25 /interface list add name=LAN add name=WAN /queue simple add max-limit=50M/50M name=50M queue=ethernet-default/ethernet-default target=ether2 total-queue=ethernet-default /routing ospf instance set [ find default=yes ] redistribute-connected=as-type-1 redistribute-static=as-type-1 router-id=10.99.99.87 /snmp community set [ find default=yes ] addresses=45.225.65.10/32 name=onnet@2017 /interface bridge port add bridge=bridge-lan interface=ether3 add bridge=bridge-lan interface=ether4 add bridge=bridge-lan interface=ether5 add bridge=bridge-lan interface=ether1 /ip neighbor discovery-settings set discover-interface-list=!LAN /interface list member add interface=ether2 list=WAN add interface=bridge-lan list=LAN add interface=ether1 list=LAN add interface=ether3 list=LAN add interface=ether4 list=LAN add interface=ether5 list=LAN add interface=Vlan-883-UpLink-viaMoradas list=WAN /ip address add address=10.10.0.34/30 interface=Vlan-883-UpLink-viaMoradas network=10.10.0.32 add address=10.99.99.87 interface=loopback network=10.99.99.87 add address=45.225.64.113/29 interface=bridge-lan network=45.225.64.112 add address=10.10.0.38/30 interface=Vlan-884-UpLink-viaRadioSantana network=10.10.0.36 add address=192.168.0.4/24 interface=vlan1 network=192.168.0.0 /ip dns set servers=8.8.8.8 /ip service set telnet disabled=yes set ftp disabled=yes set www disabled=yes set ssh address=45.225.65.10/32 port=2222 set api disabled=yes set winbox port=25000 set api-ssl disabled=yes /routing filter add chain=ospf-in prefix=0.0.0.0/0 set-pref-src=10.99.99.87 add action=discard chain=ospf-in prefix=!0.0.0.0/0 /routing ospf interface add interface=Vlan-883-UpLink-viaMoradas network-type=point-to-point add passive=yes add cost=15 interface=Vlan-884-UpLink-viaRadioSantana network-type=point-to-point /routing ospf network add area=backbone network=10.99.99.87/32 add area=backbone network=10.10.0.32/30 add area=backbone network=10.10.0.36/30 /snmp set contact="Rodrigo " enabled=yes location="Ponta Grossa/PR" src-address=10.99.99.87 trap-version=2 /system clock set time-zone-autodetect=no time-zone-name=America/Sao_Paulo /system identity set name=PR-PGO-SERP-RPC /system logging add action=disk topics=account add action=disk topics=critical add action=disk topics=event add action=disk topics=health add action=disk topics=info add action=disk topics=interface add action=disk topics=manager add action=disk topics=system /system ntp client set enabled=yes primary-ntp=200.160.0.8 secondary-ntp=200.189.40.8 server-dns-names=8.8.8.8 /system package update set channel=long-term /tool romon set enabled=yes secrets=0nn3t*8102