#        routerboard: yes
#              model: RouterBOARD 3011UiAS
#      serial-number: 783D07329C29
#      firmware-type: ipq8060
#   factory-firmware: 3.35
#   current-firmware: 6.45.8
#   upgrade-firmware: 6.45.8
# 
#             channel: stable
#   installed-version: 6.45.8
# 
# Flags: U - undoable, R - redoable, F - floating-undo 
#   ACTION                                   BY               POLICY             
# 
# software id = ADRR-540Q
#
# model = RouterBOARD 3011UiAS
# serial number = 783D07329C29
/interface bridge
add name=PONTE protocol-mode=none
/interface ethernet
set [ find default-name=ether1 ] comment="Link com UP"
set [ find default-name=sfp1 ] comment="Link com APOARM-P-1 XG 0/0/20"
/interface vlan
add interface=sfp1 name=vlan21 vlan-id=21
/interface list
add name=neighbors
/queue simple
add max-limit=100M/100M name="Queue - Arapoti" target=ether1
/snmp community
set [ find default=yes ] addresses=189.76.176.0/26,189.76.192.195/32 name=netmgr
add addresses=45.225.65.10/32 name=onnet@2017
/interface bridge port
add bridge=PONTE interface=sfp1
add bridge=PONTE interface=ether1
/ip neighbor discovery-settings
set discover-interface-list=all
/interface list member
add interface=vlan21 list=neighbors
/ip address
add address=10.0.2.234/30 comment="Gerencia local" interface=vlan21 network=10.0.2.232
/ip route
add distance=1 gateway=10.0.2.233
/ip service
set telnet disabled=yes
set ftp disabled=yes
set www disabled=yes
set ssh address=45.225.65.10/32 port=2222
set api disabled=yes
set winbox port=9990
set api-ssl disabled=yes
/snmp
set enabled=yes location=Arapote-PR trap-community=onnet@2017
/system clock
set time-zone-autodetect=no time-zone-name=America/Sao_Paulo
/system identity
set name=APOONNET-CE-1